{ "id": "endoscope-inspection-camera-1920p", "sku": "endoscope-inspection-camera-1920p", "title": "1920P Endoscope Inspection Camera with 16.4ft Semi-Rigid Probe", "slug": "endoscope-inspection-camera-1920p", "price": 39.99, "currency": "USD", "availability": "in_stock", "category": "inspection-cameras", "category_label": "Inspection Cameras", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": null, "images": [ "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/main-endoscope-inspection-camera-1920p.jpg", "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/endoscope-inspection-camera-1920p-2.jpg", "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/endoscope-inspection-camera-1920p-3.jpg", "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/endoscope-inspection-camera-1920p-4.jpg", "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/endoscope-inspection-camera-1920p-5.jpg", "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/endoscope-inspection-camera-1920p-6.jpg", "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/endoscope-inspection-camera-1920p-7.jpg", "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/endoscope-inspection-camera-1920p-8.jpg", "https://mycamerastore.co/dropship-images/inspection-cameras/endoscope-inspection-camera-1920p/endoscope-inspection-camera-1920p-9.jpg" ], "description_short": "A 7.9mm IP67 probe on a 16.4ft semi-rigid cable sends 1920P video and 2MP stills straight to iPhone or Android, with 8 adjustable LEDs and hook, magnet and mirror attachments included.", "description": "The problem with jobs you cannot see\n\nAlmost every awkward repair starts the same way. Something is wrong, and the wrong thing is on the other side of a wall, inside a pipe, or at the bottom of a hole too narrow for your hand. So you guess. You cut a bigger opening than you needed. You pull a trim panel that did not need to come off. You pour chemicals down a drain hoping the blockage is the kind of blockage they work on.\n\nAn endoscope inspection camera removes the guessing. You feed a small lens into the space, look at your phone screen, and find out what is actually in there before you commit to anything. For a lot of people that single change saves more time in one afternoon than the camera costs.\n\nThis guide covers what matters when you pick one, what the specs mean in plain language, and where this particular camera sits.\n\nHow a phone borescope works\n\nThe idea is simple. A tiny CMOS sensor and a ring of LEDs sit in a head at the end of a cable. The cable carries power in and video out. You plug the other end into your phone, open an app, and the phone becomes the screen.\n\nThat is the main split in this product category. Some inspection cameras have their own built-in display and battery. Those cost more and add bulk. A snake camera for phone leans on hardware you already own, which keeps the price down and the set small enough to live in a glovebox.\n\nThe trade-off is compatibility. The phone has to be able to talk to a USB camera. On iPhone that means iOS 9 or later with the Lightning adapter. On Android it means version 6.0 or later with OTG and USB UVC support. If you are unsure, check your phone's specifications for both. This model does not work with computers.\n\nThe three specs that decide whether it fits your job\n\nProbe diameter. This camera head measures 7.9mm. That number decides where it can physically go. Measure the opening you need to pass through against 7.9mm. You cannot get into fine tubing or very small bore lines. If you mostly inspect tight machinery, you need something closer to 5mm. If you mostly do drains and car work, 7.9mm is the practical size.\n\nCable length and stiffness. You get 16.4 feet of semi-rigid cable. Length rarely disappoints people. Stiffness often does. A fully flexible cable feels nice in the hand but collapses the moment it meets resistance, so you cannot push it past a trap. A rigid rod turns no corners at all. Semi-rigid bends where you bend it and keeps the bend, which means you can pre-shape a gentle curve, feed it in, and steer by rotating the cable at your end. Once you have used one, flexible-only cables feel useless.\n\nImage quality. Video here records at 1920P in MP4, stills come out as JPEG from a camera the maker describes as 2.0MP, and the lens is fixed-focus at about 10 cm with an f/2.8 aperture. That combination is tuned for close work. It will show you a hairline crack, a stamped part number, the texture of scale build-up inside a pipe, or whether that shadow in the cavity is a cable or a mouse nest. It will not give you a sharp wide shot of a room, and it is not meant to.\n\nLighting is half the picture\n\nPeople focus on megapixels and ignore the LEDs, which is backwards. Every space you point this thing into is dark, so the light is doing most of the work.\n\nAdjustable brightness matters more than raw output. Inside a dry duct you want as much light as you can get. Inside a wet pipe, full brightness bounces straight back off the water film and blows out the image into a white smear. Turn it down and detail reappears. The same applies to shiny metal in an engine bay. Get into the habit of adjusting the light before you decide the camera is no good at a particular job.\n\nWater, and what IP67 really covers\n\nThe probe carries an IP67 rating, and the maker describes it as suitable for underwater inspections. That is what makes this usable as a drain inspection camera rather than a dry-only tool. You can drop it into a trap with standing water, look into a sump, or check a flooded cavity.\n\nWhat is not waterproof is the plug end and your phone. Keep those dry. The most common way people kill a borescope is not the water in the pipe, it is water running back down the cable to the adapter because the cable was coiled below the connector. Keep a loop of slack above the plug so gravity works for you.\n\nWho gets the most out of one\n\nHome owners with older houses use them for drains, damp, and tracing where a pipe actually runs. Car people use them through spark plug holes to check cylinder walls, behind dashboards to find a rattle, and in engine bays to inspect the side of the block you can never see. Renters use them to find a dropped earring in a floor vent. HVAC and plumbing trades carry one for quick looks before committing to a bigger job.\n\nThe hook, magnet and mirror attachments widen that range. The magnet retrieves steel fasteners. The hook drags back anything non-magnetic. The mirror lets you look at ninety degrees, which is the only way to see the back of a fitting without dismantling it.\n\nHow to actually use it well\n\nGo slowly. Most bad footage is from people pushing too fast and losing track of orientation. Feed a foot in, look, then feed more.\n\nMark the cable. A piece of tape at one foot and at five feet tells you how deep the camera is, which turns a vague \"there is a blockage\" into \"the blockage is about four feet in, just past the bend.\"\n\nRotate rather than wiggle. The semi-rigid cable transmits twist well, so turning your hand at the entry point turns the view at the far end.\n\nRecord as you go. It is much easier to study footage afterward with both hands free than to interpret a live view while lying on a basement floor.\n\nLooking after it\n\nClean the probe after every dirty job. Drain grease and engine oil build a film on the lens window that dulls the picture, and it is far easier to wipe off fresh than dried. Dry everything before you coil it up.\n\nCoil in wide loops. Tight kinks are what eventually break the wiring inside a semi-rigid cable. Store the attachments with the camera, because a mirror clip is a small thing to lose and an annoying thing to replace.\n\nThe short version\n\nThis is a 7.9mm, 16.4ft, 1920P camera that plugs into your phone and lights up whatever it finds. The semi-rigid cable makes it genuinely steerable, the IP67 probe is made for wet pipes, and the hook, magnet and mirror turn it from a looking tool into a retrieving tool.\n\nIt suits drains, walls, vents, ducts and vehicles. It is not a long sewer reel and it is not a micro probe for fine machinery. Within its range, it does the one job you really want from it. It shows you what is in there before you start cutting.", "llm_summary": "This is a 1920P endoscope inspection camera with a 7.9mm semi-rigid probe on a 16.4ft cable, designed to connect to a phone rather than a standalone screen. Video records in MP4 at 1920P and stills in JPEG. The maker describes a 2.0MP camera and also lists a 3 MP CMOS sensor, with fixed focus at about 10 cm and an f/2.8 aperture. The probe is IP67 waterproof and carries 8 LEDs with adjustable brightness. Lightning and Type-C adapters are included for iOS 9 and later and Android 6.0 and later devices with OTG and USB UVC support; it does not work with computers. Accessories include a hook, magnet, mirror and three fixing devices. Brand, weight, color beyond black, material and country of origin are not specified by the maker.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; state consumer protection law and implied warranties for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Camera Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://mycamerastore.co/endoscope-inspection-camera-1920p/", "canonical_url": "https://mycamerastore.co/endoscope-inspection-camera-1920p/", "json_url": "https://mycamerastore.co/api/products/endoscope-inspection-camera-1920p.json", "updated_at": "2026-10-12" }